Moulded Components

In Line & Right Angle HS Boots
  Heat Shrink In-line and Right Angle Boots are used to insulate the bushings in cable termination boxes upto 36Kv specially where the clearance between phase to phase and phase to earth is less than the normal air clearance. These boots provide protection against flash-over in the event of high humidity, rodent menace and surge Impulse.The boots are made from thermally stabilized cross linked,insulating and weather resistant polymeric material.



Reusable Boots
  REPL Bushing insulating Elastomeric Boots are used to insulate the bushing in switchgear and transformer cable termination boxes upto 17.5Kv, specially where the clearances between phase to phase and phase to earth is less than the normal air clearance.These boots provide protection against flash-over in the event of high humidity and surge impulse. The boots are made from highly insulating flexible and weather resistant elastomeric material.


Right angle cold Boots
  REPL right angle cold boots, RUSC are used to insulate the bushings in cable termination boxes upto 17.5 Kv, specially when the clearance between phase to phase and phase to earth is less than the normal air clearance. These boots provide protection against flashovers in the event of high humidity , rodent menace and surge impulse. The boots are made from thermally stabilized, cross linked, insulating and weather resistant polymeric material.




Creepage Extension and Strain Relief Sheds
  Heat shrinkable Creepage Extension Sheds(CES) are used to increase the surface creepage distance of the protected cores of cable terminations without increasing the tail length.
Heat shrinkable Strain Relief Sheds(SRS) are used to restrict the cable cores from over bending, thus protecting them from damage in the terminations near the crutch area.(Especially in PILC cable Outdoor terminations).
The Creepage Extension Sheds and Strain Relief Sheds are made from thermally stabilized cross linked,non tracking and weather resistant polymeric material.



Three-Way Anti Tracking Breakout
  Heat Shrinkable Three-way Anti Tracking Cable breakouts provide an environmental seal to the crutch of 3 core Plastic and Paper insulated cables rated upto 36Kv. The breakouts are made from thermally stabilized cross linked non tracking and weatherpolymeric material. The breakouts are internally coated with mastic / hot melt adhesive.



Four-Way Non Tracking Cable Breakout
  Heat Shrinkable Four-way Non Tracking Cable breakouts provide an environmental seal to the crutch of 4 core plastic and paper insulated cables rated upto 36Kv. The breakouts are made from thermally stabilized cross linked non tracking and weather polymeric material. The breakouts are internally coated with water resistant mastic.




Three-Way Semi-Conductive Breakout
  Heat Shrinkable Three-way Semi-Conductive cable breakouts provide an environmental seal to the crutch of 3 core plastic and paper insulated cables rated upto 36Kv. The breakouts are made from thermally stabilized cross linked semi-conductive polymeric material. The breakouts are internally coated with water resistant mastic. These breakouts are specially used for 11Kv PILC belted cable to seal the crutch area as well as to provide individual screen to each core.




Two-Way LV Breakout
  Heat Shrinkable Two-way Cable breakouts provide an environmental seal to the crutch of 2 core plastic and paper insulated cables rated upto 1.1Kv. The breakouts are made from thermally stabilized cross linked, polymeric material. The breakouts are internally coated with mastic / hot melt adhesive.




Three-Way LV Breakout
  Heat Shrinkable Three-way cable breakouts provide an environmental seal to the crutch of 3 core Plastic and Paper insulated cables rated upto 1.1Kv.The breakouts are made from thermally stabilized cross linked, polymeric material. The breakouts are internally coated with mastic / hot melt adhesive.




Four-Way LV Cable Breakout
  Heat Shrinkable Four-way cable breakouts provides an environmental seal to the crutch of 4 core Plastic and Paper insulated cables rated upto 1.1Kv The breakouts are made from thermally stabilised, cross linked,polymeric material. The breakouts are internally coated with mastic/ hot melt adhesive




Five-Way LV Cable Breakout
  Heat Shrinkable Five-way cable breakouts provides an environmental seal to the crutch of 5 core Plastic and Paper insulated cables rated upto 1.1Kv. The breakouts are made from thermally stabilized cross linked,polymeric material. The breakouts are internally coated with mastic/hot melt adhesive.


Six-Way LV Cable Breakout
  Heat Shrinkable Six-way cable breakouts provides an environmental seal to the crutch of 6 core Plastic and Paper insulated cables rated upto 1.1Kv. The breakouts are made from thermally stabilized cross linked, polymeric material. The breakouts are internally coated with mastic / hot melt adhesive.



 
Copyright © REPLXicon. All rights reserved. Developed by : Innovins
 
粉嫩公主酒酿蛋通过现代科技改良丰胸产品，创新加入了泰国丰胸圣品野葛根提取物，利用国家冻干技术，最大程度的保留了其食物的活性丰胸食物，只针对女性胸部发育研究，效果较之传统酒酿蛋好三倍不止丰胸产品排行榜。粉嫩公主酒酿蛋的配方用料都是经过机构的安全检测认定丰胸产品酒酿蛋，有官方给出的证明，丰胸效果更有保障。